| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Speaking of websites... http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10262 |
Page 1 of 1 |
| Author: | Pwoolson [ Tue Jan 09, 2007 2:09 am ] |
| Post subject: | |
...go check out John Watkins' site (www.cncguitarparts.com) and look at the inlay on the front banner. That's some amazing work! |
|
| Author: | Bruce Dickey [ Tue Jan 09, 2007 5:52 am ] |
| Post subject: | |
Paul, I just thought that was done with Photoshop. Now I see it's advertising inlay done for the luthier. Well, John does all things well. Is it okay to use well on both ends of the sentence? If not just ignore the first one.  Go John, expect a package soon, Bruce |
|
| Author: | JohnAbercrombie [ Tue Jan 09, 2007 6:08 am ] |
| Post subject: | |
[QUOTE=Pwoolson] ...go check out John Watkins' site (www.cncguitarparts.com) and look at the inlay on the front banner. That's some amazing work![/QUOTE] It sure fits perfectly- almost like it was made by a machine! (I do have a lot of respect for the programming skills involved in CNC work- way beyond my ability/interest.) John |
|
| Author: | John Watkins [ Tue Jan 09, 2007 8:28 am ] |
| Post subject: | |
Thanks, guys. That is a photo and other than some brightness/contract adjustment is un-touched. Here's the same shot a little bigger and with no adjustments whatsoever. 
|
|
| Author: | Michael Dale Payne [ Tue Jan 09, 2007 9:31 am ] |
| Post subject: | |
small worm hole in the lower section of the "g" Yep that real 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|